IP Camera Software
IP Camera Software
Setting up a Recording **Click HERE for a video tutorial 1. Set the default archive location on the computer’s storage drive for where you would like to save your recordings: System Settings–> Archive Tab NOTE: That these settings are global and will apply to all cameras. Once set, you should not have to go to …
Configuration Panel Overview The Configuration Panel allows you to configure several settings for the camera and video image. When video is being displayed, different settings can be adjusted and controlled in the configuration panel. The configuration panel contains four ‘tabs’ – Video, Control, Events, and Playback.
Adding a Camera To watch a Video Tutorial Click HERE Network Settings Device Model Device Model is the model of the camera or video encoder you will be adding. Under the device model you will see “device special instructions”. These are tips that we provide for some cameras to assist in connecting to the camera. …
*Updated: 2/2/23 Online Documentation This online documentation refers to the most recent version of ViewCommander, Version 13. Although some information is the same, you can also look at your version’s user guide here Below lists the online documentation. All the documentation refers to the most recent version of ViewCommander, Version 13. Although some information is …